LAPIERRE XELIUS DRS 6.0 ROAD BIKE 2025 SEPTEMBRE BEIGE

Xelius DRS, performance in perfect comfort.

By making the radical choice to merge the best of two bikes that incorporate many professional victories, the Lapierre engineers made a bold choice. However, this machine cannot be reduced to speed alone: its new sleek lines and clean design (especially visible at the fork) offer a whole new perspective. In fact, the 3D Tubular technology, which has been meticulously reworked, frees up the whole seat post, allowing it to bend throughout its entire length.

As a result, comfort is significantly improved and subtly complements the responsive geometry of the rear triangle. Performance in perfect comfort is therefore confirmed by compatibility with a wide variety of tyres (up to 32mm) to cover a multitude of surfaces (paved roads, off-road, gravel paths, etc.). A born competitor!

Key Features 

• Components for ambition: Everything on this bike takes you further. Starting with the DT Swiss E1800 Spline alu wheels known for their unprecedented responsiveness. You'll also appreciate the Lapierre handlebar that creates a responsive cockpit perfect for clocking up the miles. 
• Carbon frame: Lightweight, stiff and at the same time still flexible material that absorbs shocks well and increases comfort. A higher price is to be expected.
• Hydraulic disc brakes: Reliable in all conditions, better modulation of the braking effect with the use of less force on the lever. Heavier weight, more demanding service.

Specification

• Frame: Carbon UD SLI
• Fork: Lapierre Carbon UD SLI
• Shifters: Shimano 105 ST-R7170 
• Crankset: Shimano 105 R7100, 50-34T 165mm (XS), 170mm (S), 172.5mm (M,L), 175mm (XL,XXL)
• Cassette: Shimano Ultegra R8101 11-34T 12s
• Chain: Shimano CN-M7100 12s 
• Front Derailleur: Shimano 105 Di2 R7150 Brazed-On
• Rear Derailleur: Shimano 105 Di2 R7150, 12s
• Pedals: VP 335 Clips & Strap
• Wheelset: DT Swiss E1800 Spline 30mm (22mm width), Centerlock, Tubeless compatible, XD Driver
• Tyres: Schwalbe One Perf, RaceGuard, MicroSkin, TLE 25-622
• Brakes: Shimano SM-RT70 160mm /140mm Centerlock
• Handlebars: Lapierre Carbon Aero, Width: 380mm (XS,S), 400mm (M), 420mm (L,XL,XXL), Drop: 130mm, Reach: 70mm, Flare: 5°
• Stem: Lapierre alloy, semi-integrated routing, -10°, Ø: 31.8mm, 80mm (XS), 90mm (S), 100mm (M), 110mm (L), 120mm (XL,XXL)
• Handlebar Tape: Lapierre tape
• Headset: ACROS Integrated
• Saddle: Prologo Dimension STN rails
• Seatpost: Lapierre Carbon, Xelius DRS, 0mm Offset, L: 350mm (XS,S,M) 400mm (L,XL,XXL)

 We reserve the right to make changes to the product information contained on this site at any time without notice, including with respect to equipment, specifications, models, colours, materials and pricing. Due to supply chain issues, compatible parts may be substituted at any time without notice.

Bike and frame weights are based on pre-production painted frames at time of publication. Weights may vary in final production.

At All Terrain Cycles, we want you to ride with confidence every time. To ensure your bike or e-bike stays in peak condition, here are some essential safety and maintenance tips.

Bicycle Safety 

Always wear a helmet – Safeguard against head injuries by using a properly fitted, safety-certified helmet.

Perform pre-ride checks – Before each ride, verify that brakes, tyres, and gears are in good working order.

Stay visible – Utilise lights and reflective gear when cycling in low-light conditions.

Follow road rules – Ride responsibly and remain aware of your surroundings.

Aftercare for Your New Bike Initial Check-Up (First 50-100 miles)

Gear Adjustment – New cables may stretch slightly; have a qualified mechanic check and adjust them.

Brake & Wheel Check – Inspect brakes for wear and ensure wheels are aligned properly.

Lubrication – Apply chain oil and check bolt tightness to maintain smooth performance.

Tyre Pressure – Regularly monitor to prevent flats and enhance efficiency.

Pedals - Ensure pedals are still tight and correctly fitted.

Routine Maintenance (Every Few Weeks)

Chain Care – Clean and lubricate your chain to minimise wear and prolong its life.

Brake Safety – Check brake pads and responsiveness before each ride.

Tyre Inspection – Look for punctures and ensure correct air pressure.

Handlebar & Stem Alignment – Confirm they are tight and secure to prevent instability.

Frame Safety Check – Look for any signs of damage or cracks.

Pedals - Ensure pedals are still tight and correctly fitted.

Professional Check-Ups

Have your bike serviced at least once a year, or more frequently if you ride often.

Aftercare for Your New Electric Bicycle (e-Bike) Initial Check-Up (First 50-100 miles)

Battery Care – Fully charge your battery (if required) before the first ride and store it in a dry, moderate-temperature environment.

Avoid Overcharging – Unplug the charger once fully charged to extend battery life.

Pedals - Ensure pedals are still tight and correctly fitted.

Routine e-Bike Maintenance (Every Few Weeks)

Motor Inspection – Listen for unusual noises and ensure smooth operation.

Battery & Connection Checks – Inspect cables and connectors for dirt, moisture, or damage.

Pedals - Ensure pedals are still tight and correctly fitted.

Seasonal e-Bike Maintenance

Check Electrical Components – Ensure wires and connections are clean and secure.

Professional Servicing – Have your e-bike inspected at least once a year or every 500-1000 miles for optimal performance.

By following these aftercare guidelines, you’ll help ensure that your bicycle runs smoothly, lasts longer, and remains a joy to ride. Stay safe and enjoy the ride!

Read our full advice

If you have any problems or concerns: Contact All Terrain Customer Services on 01274 588488 or email sales@allterraincycles.co.uk