Learning how to change an inner tube on a bicycle wheel can save you time and money in the long run. Instead of relying on expensive repairs, become your own expert with our step-by-step guide.

What tools do you need?

Before you start, make sure you have the necessary tools: a set of tyre levers, a new inner tube, a pump, and a wrench to remove the wheel if necessary.

How to remove the wheel?

Start by flipping your bike over or placing it in a bike stand. Use the wrench to loosen the nuts or quick-release lever to remove the wheel from the frame.

How to remove the tyre?

Use the tyre levers to carefully pry the tyre off the rim. Work your way around the wheel until the tyre is completely off. Be cautious not to puncture the inner tube with the levers.

How to replace the inner tube?

Once the tire is off, remove the old inner tube from inside the tyre. Check the tyre for any debris that may have caused the flat. Insert the new inner tube into the tyre, making sure it sits evenly inside.

How to put the tyre back on?

Carefully place the tyre back onto the rim, starting at the valve. Use your hands to push the tyre back on, avoiding the use of the tire levers to prevent puncturing the new inner tube.

How to inflate the tyre?

Before fully inflating the tire, make sure the inner tube is not pinched between the tire and the rim. Use the pump to inflate the tire to the recommended pressure level indicated on the sidewall of the tyre.

By following these simple steps, you can easily change an inner tube on a bicycle wheel. With practice, you'll become more confident in maintaining your bike and saving money on repairs. Happy riding!